极品嫩苞撕裂哭叫灌白浆在线观看,龙口护士视频,星空传媒回家过年七部曲,坐在学长上写作业

產品中心

熱門新聞

NLH5+5噸歐式雙梁雙吊點起重機

本文相關關鍵詞：歐式雙梁行車|雙梁橋式起重機|歐式起重機|雙梁行車|行車行吊

選型說明

1、本產品系列表僅列出了常用的基本的規格起重機，工作級別為A5(FEM 2m)時的標準跨度，沒有副鉤的室內用起重機。客戶根據需要可以提出相應的要求。

2、本系列也可以增加副起重機構，也可以增加輕載時速度加倍的設置，一般主副的設置為4:1，也可以根據客戶的要求設定。囚設置副鉤則起重機的總重及輪壓會有所增加。

3、表中的尺寸，重量，輪壓供客戶訂貨時參考，如果客戶的需要條件發生變化，如工作級別，速度，起升高度有變化時，相應的參數，尺寸，重量，輪壓等都會發生變化，實際的參數，質量，輪壓以合同的要求為準。

4、表中列出的起升速度，大小車速度為標準值，可以根據客戶的需求做相應的調整。

5、技術參數及尺寸會因為技術的改進或者升級有所變化，如有疑問的話可以和公司技術部聯系。

Instructions for selecting type

1. This series tables of product only list the general crane with basic specifications, including the standard span at working level A5 (FEM 2m) and indoor crane without auxiliary hook. Customers can make relevant requirements according

to their demands.

2. This series can add to auxiliary hoisting mechanism, and also the speed doubler if run with light load. Ordinarily, the setting of the main and auxiliary should be 4:1, which also be set in accordance with requirements of customers. It will

increase the total weight and wheel pressure if adding to auxiliary hook.

3. Dimensions, weight and wheel pressure in table will be reference for ordering of customers. If requirements of customers get changed, such as some changes occurred to working level, speed and lifting height, the relevant parameters,

dimensions, weight and wheel pressure will also get changed. The actual parameters, quality and wheel pressure should subject to the requirements in contract.

4. Lifting speed, speed of crane and trolley traveling listed in table are standard values, which can be correspondingly regulated according to demands of users.

5. Technical parameters and dimensions would be changed as with improvement or upgrade of technology. Please contact with technology department in our company if any questions.

上一篇： KSQ5T潔凈室雙梁防爆起重機

下一篇： QD16T智能搬運倉儲橋式起重機